What are the requirements for abrasive tools when the glass bottle factory produces wine bottles? The strength of the wine bottle manufacturer is also the basic rule for the abrasive tool. Generally, the strength should be higher, but the index value of the strength alone is not enough. The external economic organization of the mold material and the strength and composition of the crystal phase should be considered. It accounts for many aspects of testing. It is not good to only look at the strength of objectivity. The material of the touch tool must be selected well, otherwise it will cause all damage in the processing process.
Therefore, each wine bottle factory must implement this rule to reduce the relative damage. The selection of mold materials will immediately endanger the service life and accuracy of the abrasive tools. It can be compared with the total number of products produced. The appropriate mold can greatly reduce the cost of the product, and it can be used to make abrasive tools for container consumption.
Its raw materials must have excellent production and processing characteristics, electric welding characteristics, and appropriate strength according to the heat supply treatment. The cold and heat cycle system that touches the high temperature laminated glass for a long time should be resistant to high temperature impact and air oxidation. And heat exhaustion. In addition, after heating and cooling from time to time, the deformation of the abrasive tool is small, wear-resistant, and the specification is stable.
In addition to the above rules, glass bottles should have moderate friction resistance and non-wetting properties at high temperatures. In addition, the heat transfer coefficient of the mold material is also that the abrasive tool should be very important at high temperatures. This is for glass. Refrigeration, the thickness of the mold, and the air-conditioning and refrigeration methods are closely related.
